SV8300 911 2

[newglide]

I have an SV8300. How do I set it up so that when a user dials 911 I get a nothfication?

 

[belevedere]

in your LCR table fro 911, CMD 8A5XXX > 166 > set to a 0
CMD 5116 > 04> set to extension to receive notification. (up to 2 can be set)
CMD 9000 > ext,button> set F5025.
To allow for override set another key to F0006 = executive override.

 

[newglide]

Thanks belvedere,
I'm a newbie so i'll appolagize for the dumb questions now....
When I go to the LCR table I have several patterns to choose from, 5000 - 5255. Which would i choose?
I do not see CMD 5116,

I should also let you know I've never used the command line on the NEC I use the System Data tab.

Thanks

 

[belevedere]

LCR on this system is difficult. I usually take a full day and a half to teach it. I use CMD line for everything as do many of the long timers. Here is a sample string using area codes begining with 12 as an example, and using trunk route 10 to dial out;
8A4005 de 12 de 0001
8A0001 de 1 de 00110 (table 001 and TK RT 10)
8A5001 de 166 de 0 exe.
NOTE the table numbers last digits follow along to the next command.
CMD 5116 de 4 de extension number exe.

 

[newglide]

Thanks, This may be one of those projects that I let someone with more time on the system handle.

 

[OzzieGeorge]

This FAQ may help!.....

http://www.tek-tips.com/faqs.cfm?fid=6937

 

[JTchoe]

Hi,

I have the same question as newglide, and I don't see CMD 5116 using the System Data tab either.