Have Customer with SV8100 running 3.x version software. They would like to upgrade to 9.5. Can the software be downloaded from the NEC NTAC site? Is an upgrade license required? And is it as easy as loading from a USB stick in the SV8100? Any issues going straight from 3.0 to 9.5?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SV8100 Upgrade Question
- Thread starter TXtac
- Start date
You can upgrade without a license but any new (9.5) features will not work without a license.
I took a 4.0 to an 8.0 once with no problems. I can't say about 3.0 to 9.5.
I use a 4 GB USB 2.0 thumb drive. I would not try it with a USB 3.0 stick.
And make a backup, of course.
I took a 4.0 to an 8.0 once with no problems. I can't say about 3.0 to 9.5.
I use a 4 GB USB 2.0 thumb drive. I would not try it with a USB 3.0 stick.
And make a backup, of course.
- Status