sv8100 to a 3300

[pault1968]

Hi All
Has any one connected an nec sv8100 to a mitel 3300 ,mitel are no help at all ,we have a fibre we can use from the nec to the mitel but whats the best way to connect them ?????

 

[eddiebullman]

I would say the best way to link the two systems is SIP trunks on both systems.

I have done this to an avaya ip offive and it works ok

 

[pault1968]

Thx Eddie i will ask mitel tomorrow about the sip trunks is there any other ways of connection as mitel don't want to pay a bean for any extra equipment needed.

 

[eddiebullman]

Hi pault1968

On the Mitel side it should only be licenses on the NEC side you will need an IPLA card installed and Sip trunk licenses

the only way you can link them over the fibre is via SIP

Or the other option is put the NEC CCU next to the Mitel CCU and link them by Qsig using PRI cards and run NEC IP phones over the fibre.

 

[pault1968]

Hi EDDIE
Looks like you are spot on ,the best way is the SIPS over the fibre but mitel won't commit to if it will work but i dont see why it should'nt,
many thanks for your help