Supressing alarms in the Meridian ...

[Jeppedal]

Hi!

Is there any way of supressing alarms in the Meridian? I'm doing alarm monitoring on several Meridian systems. Some of these systems are generating alarms that is important for one system, but not for the others. Can I do some kind of filtering in the PABX so that it will suppress alarms on one specific D-channel but not on another as an example?

Best regards
Paal E. Jeppedal

 

[Reusser]

not in the meridian switch - you can usually do this in the monitoring device.

 

[hbrx]

Yes, you can suppress Alarms on Meridian.
Look into LD117 and Alarm Filtering.
You can as far as i know not differentiate d-channels. The filtering is for types or instances of messages.