Bellpatrick
Technical User
I have a customer with a 3300 and the phones are all ending their DID on outgoing calls. Is there a way that I can suppress sending the CPN on a per call basis?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Suppressing calling party number
- Thread starter Bellpatrick
- Start date
- Status
Yes, Call by call is available but you need to be fairly familiar with ARS.
Yes, Each user can be permanently set to send a specific number
Yes, all users can be set to send a default number.
All of the above.
**********************************************
What's most important is that you realise ... There is no spoon.
Yes, Each user can be permanently set to send a specific number
Yes, all users can be set to send a default number.
All of the above.
**********************************************
What's most important is that you realise ... There is no spoon.
we have used a different access code method
0+number = normal external call with cli
*0+number = external call prefixed with cli block code
- basically duplicate ars with 2 sets of routes , one set has strip 1( remove access code)
- Other set of routes has strip 1 add 1831 ( for australia this blocks cli)
If I never did anything I'd never done before , I'd never do anything.....
0+number = normal external call with cli
*0+number = external call prefixed with cli block code
- basically duplicate ars with 2 sets of routes , one set has strip 1( remove access code)
- Other set of routes has strip 1 add 1831 ( for australia this blocks cli)
If I never did anything I'd never done before , I'd never do anything.....
- Status
Similar threads
- Locked
- Question