Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Support Opportunity MICS PRI
- Thread starter maxse
- Start date
Most likely if in US, it will be ESF NI2 B8ZS and all this is programmed in the hardware section of the programming. If you are using a fractional you need to disable the channels of the 23 channel PRI that are not being used...this info will be acquired from whomever is installing the T1.
"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein
NCSS NCTS NCTE CS1000E
Mitel 3300 4.2 basic & advanced, 5000 4.0, NuPoint I&M 4.2
"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein
NCSS NCTS NCTE CS1000E
Mitel 3300 4.2 basic & advanced, 5000 4.0, NuPoint I&M 4.2
- Status
Similar threads
- Locked
- Question
- Locked
- Question