Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Supernetting 2

Status
Not open for further replies.

ElijahBaley

IS-IT--Management
May 4, 2001
1,598
GB

Hi,

After getting a bit confused in another thread I now understand that what they were dealing with there was 'Supernetting' (not subnetting) borrowing bits from the network portion of a address to create a inclusive range of addresses from the pool of the merged class C networks.

At first glance I thought the example below was a error, class C address with a class b subnet mask, So my question is, how can I identify the 4 subnets and the combined host range from the ip address and supernet mask below?

IP Address……………..192.168.35.4
Subnet Mask……………255.255.252.0

Thanks for any help,
 
Hi ElijaBailey,
Here is the short answer :

Subnet 1 = 192.168.32.0, Range 192.168.32.1 - 192.168.32.254, Broadcast 192.168.32.255
Subnet 2 = 192.168.33.0, Range 192.168.33.1 - 192.168.33.254, Broadcast 192.168.33.255
Subnet 3 = 192.168.34.0, Range 192.168.34.1 - 192.168.34.254, Broadcast 192.168.34.255
Subnet 4 = 192.168.35.0, Range 192.168.35.1 - 192.168.35.254, Broadcast 192.168.35.255

What you want to know is how do you get to this point!!
Firstly, I write out the subnet in binary, splitting the host from the subnet - eg 192.168.001000 | 00.00000000
Then you can get the four subnets - eg | 01.00000000/10.00000000/11.00000000. Then it is easy to fill int the host range and the broadcast address.

Hope this helps
ajcazz
 

Thanks acjazz

I think I get it!

192.168.001000|00.00000000 - 32.0
192.168.001000|01.00000000 - 33.0
192.168.001000|10.00000000 - 34.0
192.168.001000|11.00000000 - 35.0

Any chance you could throw a few at me to practise with


Best regards
 
Hi ElijaBailey,

No problem - try a few simple ones first.

List the subnet, range of usable addresses and the broadcast address for the following subnets only:

IP 192.168.71.5, subnet mask 255.255.252.0

No a bit harder :

IP 172.116.17.231, Subnet 255.255.240.0

Hint - you will only list one subnet and broadcast address for each problem.

ajcazz
 
Hi acjazz

Thanks for your help,

I have answered the first question below, but am unsure of the second one - should it read

192.116.12.231

and not

172.116.17.231

or is it a class B address using traditional subnetting

Subnet 172.116.16.0
First Host 172.116.16.1
Last Host 172.116.31.254
Broadcast 172.116.31.255

----------------------------------------------------
'List the subnet, range of usable addresses and the broadcast address for the following subnets only:

IP 192.168.71.5, subnet mask 255.255.252.0'
----------------------------------------------------

192.168.010001|00.00000000 = 68.0
192.168.010001|01.00000000 = 69.0
192.168.010001|10.00000000 = 70.0
192.168.010001|11.00000000 = 71.0

Subnet 192.168.68.0
First Host 192.168.68.1
Last Host 192.168.71.254
Broadcast 192.168.71.255

Im I right in thinking that in these circumstances the merged subnet and broadcast addresses could be used as hosts:

192.168.68.255
192.168.69.0
192.168.69.255
192.168.70.0
192.168.70.255
192.168.71.0

Thanks again,






 

Ok, here's the second one (I think)
----------------------------------------------------
List the subnet, range of usable addresses and the broadcast address for the following subnets only:

IP 192.116.17.231, Subnet 255.255.240.0
----------------------------------------------------

192.116.0001|0000.00000000 = 16.0
192.116.0001|0001.00000000 = 17.0
192.116.0001|0010.00000000 = 18.0
192.116.0001|0011.00000000 = 19.0
192.116.0001|0100.00000000 = 20.0
192.116.0001|0101.00000000 = 21.0
192.116.0001|0110.00000000 = 22.0
192.116.0001|0111.00000000 = 23.0
192.116.0001|1000.00000000 = 24.0
192.116.0001|1001.00000000 = 25.0
192.116.0001|1010.00000000 = 26.0
192.116.0001|1011.00000000 = 27.0
192.116.0001|1100.00000000 = 28.0
192.116.0001|1101.00000000 = 29.0
192.116.0001|1110.00000000 = 30.0
192.116.0001|1111.00000000 = 31.0

Subnet 192.116.16.0
First Host 192.116.16.1
Last Host 192.116.31.254
Broadcast 192.116.31.255

 
You got it!!!
Well done.
When you do the exam, Cisco will try to trick you into picking the wrong network by giving you a list of ones that look correct but are not - be careful take your time and work it out - these are the easy ones that go well towards a passing score.

Any other questions? issues?
ajcazz
 
Ajcazz,

Thanks for all your help, much appreciated.

EB
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top