I have a Sun System V210 blade server and I don't know how to connect it to my desktop so that I can use it to it's fullest capcity. What cabels do I need it has no video card so I can't use a monitor on it? The server has a serial mgt. port, net mgt. port and serial port as well as 4 10/100/1000 ethernet ports, 2 USB's and a skiiny looking port market with a "<-" semble inside a box.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sun server connections.
- Thread starter yogitech1
- Start date
KenCunningham
Technical User
Have you set the box up via the serial or net management port?
The internet - allowing those who don't know what they're talking about to have their say.
The internet - allowing those who don't know what they're talking about to have their say.
- Thread starter
- #3
IT hasn't really been setup at all I've never used a blade server before so I'm not sure where to start to access what is on the unit, to my knowledge it has never been used. I want to change the operating system on it to something I am familiar with. I know nothing of Solaris unless you know someone that wants to buy it for a good price?, I plugged it in and it does turn on.
- Status