Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

sucession 3.0 upgrade problem with PMS and MERMAIL

Status
Not open for further replies.

kspabx

Programmer
Dec 10, 2004
8
CA
FIRST TIME USING THIS SITE, I RECENTLY UPGRADED A OPT 11C
TO SUCC 3.0 FROM 25.4 EVERYTHING SEEMED TO WORK FINE EXCEPT FOR A INTERMITTENT TROUBLE WITH MERMAIL 13 AND THE CUSTOMERS PROPERTY MANAGEMENT SYSTEM.WHEN THE MAID SERVICE
CLEANS THE ROOM SHE LIFTS THE RECEIVER OFF HOOK THEN CLEANS ROOM AND WHEN THEY ARE DONE HANGS UP THE PHONE TO SIGNAL TO THE PMS THAT THE ROOM IS CLEAN .THIS SHOULD UPDATE PMS ROOM STATUS, IT'S WORKING EXCEPT FOR 2 OR 3
ROOMS A DAY AND NOT ALWAYS THE SAME ROOMS.I HAVE MONITERED
THE LINK IN MERMAIL AND LOOKS LIKE THE PMS WILL NOT SEND BACK A "ACK" BACK TO THE MAIL ON THESE OCCASION WHEN THE PMS IS NOT UPDATED PROPERLY.THE PMS SYSTEM IS FOR A DAYS INN USING BRILLANT SOFTWARE.WEIRD ONE!
 
Has your vendors installed all peps for the PBX? Doublecheck all your parameter settings to make sure nothing has changed (sometimes upgrades change a default). Check your card vintages on Meridian Mail..
 
that is a wierd one.Is it possible that the upgrade
was corrupt.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top