succession 3.0 net data 1

[1brc]

I need some help. we have a 61c with Succession 3.0. I need to be able to transfer a call fron a did trunk to a tie trunk. In the cdb under net data there should be a prompt (diti) that could be answered yes or no to allow this. The problem is I don't get that prompt. I have everything that I can think of set to allow trunk to trunk transfer so I am hoping this will let it happen. Can anyone tell me how to get this prompt?

 

[johnpoole]

check the ncos on your trunks, that has stopped me before

john poole
bellsouth business
columbia,sc

 

[1brc]

Johnpoole,
I have. Ncos is 0 on both trunks. Frl is the same on both routes. The cos on the set is fttu. Net data has extt and trnx both set to yes. The only thing that I can find that may be stopping the transfer is net data not allowing did to tie trunk transfer, that's where the diti prompt needs to be yes.

 

[Sennback]

also check RART for your route in LD 56.
That could also block connection between routes.

Best is if you finds no data in the RART block.

check also for CFWR = NO on your route.
(Call ForWard Restriction)

 

[1brc]

Thanks Sennback and Johnpoole, Ihave checked all of this and it still don't work. Ld 56 prt rart for both routes and Art is 0 for both. Anybody got another suggestion?

 

[1brc]

I found the answer to this issue, in the rdb chg cntl then chg nedc and fedc to yes.