Hi everyone:
I'm having some issues upgrading firmware on our Nortel/Avaya 1140E and 1230 sets. I've got the latest version for both phones (99). When the phone boots, it downloads the firmware, but then I get a message on the display that says [FW] Auth. Failed and the current firmware remains in place. I was using the UCx server as the provisioning server. For grins, I set up another TFTP server on our file server. I saw very clearly that the phones download the firmware, but it doesn't apply it and I get the Auth. Failed message. I tried to upload one version earlier of the firmware, and the same results. The 1140E's are running c8Q and the 1230's are running 96. I have several sets, and they all seem to provide the same error. Thanks for any help that you might be able to provide! -Michael
I'm having some issues upgrading firmware on our Nortel/Avaya 1140E and 1230 sets. I've got the latest version for both phones (99). When the phone boots, it downloads the firmware, but then I get a message on the display that says [FW] Auth. Failed and the current firmware remains in place. I was using the UCx server as the provisioning server. For grins, I set up another TFTP server on our file server. I saw very clearly that the phones download the firmware, but it doesn't apply it and I get the Auth. Failed message. I tried to upload one version earlier of the firmware, and the same results. The 1140E's are running c8Q and the 1230's are running 96. I have several sets, and they all seem to provide the same error. Thanks for any help that you might be able to provide! -Michael