Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

strobe for calls waiting in queue

Status
Not open for further replies.

2BAvoice

Vendor
Feb 28, 2006
243
US
Definity G3R8, we have a queue for service calls and would like to connect a strobe to an analog station port. This strobe to flash when there are 10 calls waiting in queue. I have done this years ago but the cobwebs keep getting in my way. Can anyone give me a quick snap shot of the steps in a vector doing this sort of thing?

thanks
 
on the hunt group assign the analog port:

Queue Limit: 20
Calls Warning Threshold: Port:
Time Warning Threshold: 0 Port: 08C0901
 
we have this setup in the hunt group itself. on the bottom of the first page, you enter your parameters, one of which is the analog port that the strobe will be attached to.

thanks, tim
 
Wow, thanks guys. Actually after posting this, I went out to the truck and pulled out of the drive,and had a flash of memory. Blew some of the cob webs out. I remembered it was on the hunt form, just not exactly where.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top