Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Streamline 8 Port

Status
Not open for further replies.

pandabear1

Technical User
Oct 14, 2004
887
CA
has anyone found any issues with the Streamline 8 Port unmanaged device on the MCD or 200AX/ICP? Also when used in conjunction with an existing 24 or 48 port Streamline? I have ordered one to try myself and if I find any issues will post.
 
Be very interested pandabear1, as I plan to use this for delivering some IP Dect basestations onto existing copper cables.

Good to hear from you on your findings.

 
Keep us posted. I've heard lots of horror stories about these things and while I've avoided them up to now, I will be putting a few in over the next couple of months.
 
I am currently using the Streamline 24 and 48 with version 3.1.8 and it works great but the displays on the screen when logged in cannot always be trusted, the coloured ports page when first logged in and then the ethernet tab and under downlink ports cannot be trusted, you can run a command to update this section ever 300 seconds in terminal mode "set-l2age 300" but you still cannot trust it. Release 3.2 is supposed to address some of these concerns
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top