Since installing my new Benq 2420HDBL monitor (connected by DVI-D single link cable) to a Windows Vista PC I am finding that when I type into some forums and Facebook and Flickr I am getting a line of vertical barcode type images under the text. This does not occur in my applications or incidentally on this forum.
These are the details of my graphics card.
Intel® Graphics Media Accelerator Driver Report
Report Date: 5/21/2011
Report Time[hr:mm:ss]: 21:29:51
Driver Version: 8.15.10.2302
Operating System: Vista Service Pack 2(6.0.6002)
Default Language: English (United Kingdom)
DirectX* Version: 10.0
Physical Memory: 1980 MB
Minimum Graphics Memory: 32 MB
Maximum Graphics Memory: 766 MB
Graphics Memory in Use: 126 MB
Processor: x86 Family 6 Model 23 Stepping 10
Processor Speed: 2999 MHz
Vendor ID: 8086
Device ID: 2E12
Device Revision: 03
* Accelerator Information *
Accelerator in Use: Intel(R) Q45/Q43 Express Chipset
Video BIOS: 1666.0
Current Graphics Mode: 1920 by 1080
* Devices Connected to the Graphics Accelerator *
Active Digital Displays: 1
* Digital Display *
Monitor Name: BenQ G2420HDBL (Digital)
Display Type: Digital
Gamma Value: 2.2
DDC2 Protocol: Supported
Maximum Image Size:
Horizontal: 20.87 inches
Vertical: 11.42 inches
Monitor Supported Modes:
640 by 480 (60 Hz)
640 by 480 (75 Hz)
720 by 400 (70 Hz)
800 by 600 (75 Hz)
800 by 600 (60 Hz)
832 by 624 (75 Hz)
1024 by 768 (75 Hz)
1024 by 768 (60 Hz)
1152 by 870 (75 Hz)
1152 by 720 (60 Hz)
1280 by 960 (60 Hz)
1280 by 1024 (60 Hz)
1280 by 1024 (75 Hz)
1280 by 720 (60 Hz)
1600 by 900 (60 Hz)
1680 by 1050 (60 Hz)
1920 by 1080 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Supported
Raw EDID:
00 FF FF FF FF FF FF 00 09 D1 5F 78 45 54 00 00
08 15 01 03 80 35 1D 78 2E 60 85 A6 56 4A 9C 25
12 50 54 A5 6B 80 71 00 81 C0 81 40 81 80 A9 C0
B3 00 D1 C0 01 01 02 3A 80 18 71 38 2D 40 58 2C
45 00 DD 0C 11 00 00 1E 00 00 00 FF 00 57 32 42
30 30 30 34 39 53 4C 30 30 30 00 00 00 FD 00 32
4C 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC
00 47 32 34 32 30 48 44 42 4C 0A 20 20 20 00 BD
I have checked my DVI-D connections and they seem to be fine. What I cant understand is why it only occurs on certain pages. I have just noticed that I now have white lines across the grey at the bottom of this message. Puzzled.
These are the details of my graphics card.
Intel® Graphics Media Accelerator Driver Report
Report Date: 5/21/2011
Report Time[hr:mm:ss]: 21:29:51
Driver Version: 8.15.10.2302
Operating System: Vista Service Pack 2(6.0.6002)
Default Language: English (United Kingdom)
DirectX* Version: 10.0
Physical Memory: 1980 MB
Minimum Graphics Memory: 32 MB
Maximum Graphics Memory: 766 MB
Graphics Memory in Use: 126 MB
Processor: x86 Family 6 Model 23 Stepping 10
Processor Speed: 2999 MHz
Vendor ID: 8086
Device ID: 2E12
Device Revision: 03
* Accelerator Information *
Accelerator in Use: Intel(R) Q45/Q43 Express Chipset
Video BIOS: 1666.0
Current Graphics Mode: 1920 by 1080
* Devices Connected to the Graphics Accelerator *
Active Digital Displays: 1
* Digital Display *
Monitor Name: BenQ G2420HDBL (Digital)
Display Type: Digital
Gamma Value: 2.2
DDC2 Protocol: Supported
Maximum Image Size:
Horizontal: 20.87 inches
Vertical: 11.42 inches
Monitor Supported Modes:
640 by 480 (60 Hz)
640 by 480 (75 Hz)
720 by 400 (70 Hz)
800 by 600 (75 Hz)
800 by 600 (60 Hz)
832 by 624 (75 Hz)
1024 by 768 (75 Hz)
1024 by 768 (60 Hz)
1152 by 870 (75 Hz)
1152 by 720 (60 Hz)
1280 by 960 (60 Hz)
1280 by 1024 (60 Hz)
1280 by 1024 (75 Hz)
1280 by 720 (60 Hz)
1600 by 900 (60 Hz)
1680 by 1050 (60 Hz)
1920 by 1080 (60 Hz)
Display Power Management Support:
Standby Mode: Not Supported
Suspend Mode: Not Supported
Active Off Mode: Supported
Raw EDID:
00 FF FF FF FF FF FF 00 09 D1 5F 78 45 54 00 00
08 15 01 03 80 35 1D 78 2E 60 85 A6 56 4A 9C 25
12 50 54 A5 6B 80 71 00 81 C0 81 40 81 80 A9 C0
B3 00 D1 C0 01 01 02 3A 80 18 71 38 2D 40 58 2C
45 00 DD 0C 11 00 00 1E 00 00 00 FF 00 57 32 42
30 30 30 34 39 53 4C 30 30 30 00 00 00 FD 00 32
4C 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC
00 47 32 34 32 30 48 44 42 4C 0A 20 20 20 00 BD
I have checked my DVI-D connections and they seem to be fine. What I cant understand is why it only occurs on certain pages. I have just noticed that I now have white lines across the grey at the bottom of this message. Puzzled.