We have a new customer who had a BCM 400 sw 3.5 installed by another vendor a few years back. I went out to the site yesterday for the first time to do a PRI cutover. I noticed that all lights on the front of the BCM with exception to the power, and the temperature lights were blinking green. All the phones and voicemail were functioning, the only two issues were that the time was wrong and according to the customer, has been wrong for 6 months and I couldn't log into the system. Since I didn't need to do any programming, I left it because I was nervous about doing a reboot. Any ideas what the issue could be or has anyone else had this issue before? Thanks!