Storedge 3510 connected to sunfire v440

[mpmatanguihan]

Hello,

I need help for the detailed procedure on how to connect the 3510 via fiber channel card to sunfire v440.

Thank you

 

[alray]

You might try :-

http://sunsolve.sun.com/handbook_private/Systems/E3500/docs.html

Hope this helps

Ray

Even a bad day at the races is better than a good day at the office.

 

[mpmatanguihan]

We can now detect the fc cards.

What are the configs that needs to be edit in sun fire v440?

And also, how wil i map the fiber card of the sunfire v440 to the sun array 3510.

CAn you assists me.

Thank you very much

 

[maximusGeek]

Can you see the device in format?

If you are running Solaris 9, You need the Sun SAN Foundation Package installed.

Also, have you configured the Luns yet? You need to create the luns and assine them to interfaces. Keep in mind that luns over 2TB are problematic (at least I have had problems with them)

 

[mpmatanguihan]

this is what we did

1. created luns
2. and issued "reset-hardware" in the emulex admin.

Thank you guys

 

[mpmatanguihan]

this is what we did

1. created luns
2. and issued "reset-hardware" in the emulex admin.

and it is OK now

Thank you guys