In the last 9 months I have rolled out a large amount of Windows XP Professional desktops and laptops. What I have been running into from time to time is for some reason the print spooler will stop and the customer can't print. I go to the workstation and restart the spooler, but no sooner than I try to print that document again the spooler stops. These documents aren't large massive documents. Most are small one page basic fax cover sheet or medium sized coorespondance. A couple of those print jobs had several pages with alot of detail that had to print.
Sometimes deleting the network printer and re-adding it clears it up. I have also noticed that when it happens it occurs on the same small group of computers for several days in a row then it doesn't happen again. This has been a frustating problem when it occurs because I can't get the customer up and running again quickly. Wondered if any has seen this and if you have any suggestions.
Regards,
Techwtr
Sometimes deleting the network printer and re-adding it clears it up. I have also noticed that when it happens it occurs on the same small group of computers for several days in a row then it doesn't happen again. This has been a frustating problem when it occurs because I can't get the customer up and running again quickly. Wondered if any has seen this and if you have any suggestions.
Regards,
Techwtr