Stop L500 From Auto Forwarding

[thegenerallee]

Hi,

I'm new to the PBX scene but it's now my job and while I've been taught a decent bit (in my eyes at least) I've still got a lot to learn. I've searched the forums and haven't found anything that I feel relates to my particular situation. Here's my current issue that I'm unsure about.

An L500 is automatically forwarding to a physical phone but when I look at the TN's setup I don't see anything that seems obvious as to why it's doing so. It's extension is 8507 and it is forwarding to the extension 7507. If any more information is needed, please let me know. Thanks for the help in advance.

Here's the config:

TN 156 0 09 00 PHANTOM
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 8507 0 MARP
AST NO
IAPG 0
HUNT 8777
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST
SCI 0
CLS UNR DTN FBD XFD WTA THFD FNA HTA ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR DCFW 4 8777

 

[nessman]

Sometimes I forget the obvious... unless it's an IP or 3900 series, can't always trust what's on the desi labels.

I'm always finding myself dialing the operator or one of my colleagues to confirm what number I'm dialing from - or if it's a single DN phone that has hunt/FDN values to Call pilot, I just dial the number on the phone to confirm if it's indeed that number.