Stop CLID over DPNSS??

[sl1input]

Hi

I want to stop Caller Information being sent over a DPNSS connection from a CS1000 to 3rd party system.

I have DDGD set on digital sets which stops internal clid being sent, however when an extn is dialled on the 3rd party system the extn number is displayed.

Is there any way to stop the extn number display across the DPNSS link?

 

[Firebird Scrambler]

I've found out this bit of info to send out a number!

To configure the meridian to give out the main number for the I/C DPNSS route,
use the 'Send Billing Number' feature:-

1. On the i/c DPNSS route data block:-

BILN YES <====== Gate opener
BLEN MRD Main site number length
BNUM MRD Main site number to be sent to exchange
BDSP YES

It may be a clue to stopping the CLID.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.orange.co.uk/firebird_scrambler

Useful Nortel forum at

http://www.tspforum.com

If it's working, then leave it alone!.