I've recently replaced an IBM LTO1 drive by an LTO 2 FC drive within an 8 drives STK L700e. all cdrives onnected to a brocade 3800 switch, Sun servers with JNI 6460 HBAs also connected to this switch.
Solaris/Netbackup has been re-configured to map the new Tape Drive, also updated Solaris st driver, and installed latest NBU patch for LTO2 support.
All the media on the L700 are hcart while LTO2 drive support hacart2 and hcart tapes.
the new LTO2 drive is downed by Netbackup because media write errors.
sgscan detects correctly all the drives. And also when I load manually a tape, i can run a backup/restore with tar without problem.
Thanks for ur help.
Yelhammar
Solaris/Netbackup has been re-configured to map the new Tape Drive, also updated Solaris st driver, and installed latest NBU patch for LTO2 support.
All the media on the L700 are hcart while LTO2 drive support hacart2 and hcart tapes.
the new LTO2 drive is downed by Netbackup because media write errors.
sgscan detects correctly all the drives. And also when I load manually a tape, i can run a backup/restore with tar without problem.
Thanks for ur help.
Yelhammar