steps for installing sap 4.6b on stand alone machine.

[sandy251078]

if any one has steps for installation of sap 4.6b on a stand alone machine please help me.
thank u.

 

[rajitharam]

Hi Sandy
I found following on the net, but I stucked at following step, i do not have db_ides.r3s, I don't know what to do now????
************************
Logon on as TEKADM
Copy the file "db_ides.r3s" from DB1\IDES\NT\ORA\DB_IDES.R3S
(18KB files size) to C:\users\tekadm\install
*************************

Procedure for installation on W2k server with sp3.

Installation Of SAP 4.6b

System Requirements.

P-III System
1024 MB or 512 MB RAM
Minimum 60GB HDD
40 GB Hdd (2GB for WinNT & 38 GB for oracle & SAP)
10 GB Hdd for CD dumps.
CDROM drive.
Network Card

C:\ - 10GB - Windows 2000 Server - NTFS
D:\ - 40GB - Oracle & SAP - NTFS
E:\ - 10GB - CD Dumps - NTFS
F:\ - CDROM Drive

Install Windows 2000 server in first 10GB partition
Computer Name - SAPSRV
IP Address - 192.168.1.2
Subnet Mask - 255.255.255.0
Work Group - TEKSOFT
Complete the installation & Restart.

Install Service Pack 3
Install All the Drivers
Install IE6 SP1

Create two Users as mentioned bellow

Start -> Programs -> Administrative Tools -> Computer Management -> Local Users
and Groups -> Users -> New User

a. First user name TEKADM
Give password, disable the already enabled option & enable
"Password Never Expires & user cannot change the password option "

b. Second user name SAPServiceTEK
Give password, disable the already enabled option & enable
"Password Never Expires & user cannot change the password option "

Add the two Users to Administrators Group

Change hostfile

Open C:\Winnt\System32\driver\ect\host file in Notepad & add IP Address and Computer Name in
The bottom of file. Save & Exit.


Change the Virtual Memory

C: Min - 512MB
Max - 1024MB

D: Min - 2048MB
Max - 2560MB

Change the File and Printer sharing properties to “ Maximize through

Logon as TEKADM
Insert SAP-Oracle CD &
Select F:\NT\i386\setup & click enter
Location of oracle D:\orant & click enter
Accept path change & click enter
Oracle 8 enterprise edition & click enter
(Oracle 8.1.7 will not be supported by SAP Kernel 4.6B)
(Oracle 8.1.7 will be supported by SAP Kernel 4.6C only)

After completion of oracle Stop the service "Oracle TNSlistner 80"
Select F:\NT\i386\Patchs\8.0.5.2.2\setup & click enter
Accept the defaults & complete the installation.
Restart the system.

Dump all the export CDs (6 CDs) into
E:\dump\db1 - export CD 1
E:\dump\db2 - export CD 2
E:\dump\db3 - export CD 3 (To dump type as E:\dump\db1>Xcopy /e f: & enter)
E:\dump\db4 - export CD 4
E:\dump\db5 - export CD 5
E:\dump\db6 - export CD 6

Insert Kernel CD

Select F:\46bker\NT\i386\NTPATCH\R3dllins & click enter
This will install patch for NT.

Restart the system.



Logon as TEKADM
From kernel CD
F:\NT\common\r3setup & enter
Enter the following

System Name - TEK (must be 3 Letters Capital)
Location - C:\users\Tekadm\install (it comes by default)
Accept to restart the machine.

Logon on as TEKADM
Copy the file "db_ides.r3s" from DB1\IDES\NT\ORA\DB_IDES.R3S
(18KB files size) to C:\users\tekadm\install

Start r3setup from
C:\users\tekadm\install\r3setup & enter
Select "central.r3s" file & enter
& Follow as mentioned bellow

System Name - TEK
Instance no. - 00
Accept Defaults
Directory of SAP system -change to D:
RAM of the sys. - Accept the default
Location of the KERNEL CD - F:
Port no. - 3600
Enter the password of TEKADM two times
Enter the password of SAPServiceTEK two times
Start the installation.
This will come upto

Select C:\users\tekadm\install\r3setup & enter
Select "db_ides.r3s" & enter
System Name - TEK
Instance no. - 00
Accept Defaults
Select WE8DEC (default for r/3 4.x system) & enter
Oracle dir. - D:

Location of SAP Database specific files

SAP Database Drive

SAPARCH D
SAPBACKUP D
SAPCHECK D
SAPREORG D
SAPTRACE D & enter


Location of Oracle Data files

Oracle Data directory drive

SAPDATA1 D
SAPDATA2 D
SAPDATA3 D
SAPDATA4 D
SAPDATA5 D
SAPDATA6 D & enter


Location Database LOG files

Dir. for LOG files Drive

ORIGLOGA D
ORIGLOGB D & enter


Location Mirrored Database LOG files
(Change from D to C)

Dir. for LOG files Drive

MIRRLOGA C
MIRRLOGB C & enter

Accept the default RAM & enter

Location of export CDs dump

CD name Location Copy destination

KERNEL F:\46bker
EXPORT1 E:\dump\db1\1
EXPORT2 E:\dump\db2\2
EXPORT3 E:\dump\db3\3
EXPORT4 E:\dump\db4\4 (Clear this field)
EXPORT5 E:\dump\db5\5
EXPORT6 E:\dump\db6\6 & enter


Enter the Password of TEKADM
No. of parallel process - 1
Start installation.

Wait for 14 to 15 Hrs & installation will come Upto 91% & will ask for SAPr3 password.
Enter the password of TEKADM & enter

This will come upto 95%
Open SAP Management Console from desktop & Right click "TEK" & start the service.
Wait for the service to start & will change from yellow to green.
Come to the r3setup screen & click next.
This will bring upto 100% & the installation is over.
Exit the r3setup & stop the "TEK"service & Restart the system.


POST INSTALLATION TASKS

After SAP installation, install SAPGUI in the server. (CD 9)
Restart the system

Open SAP Management Console & start the sap service.

Start the Sap Frontend from the start\programs\sap frontend\sapsrv.

Logon as
Client 000
User name DDIC

Password 19920706
Language en



--------------------------------------------------------------------------------

* Note : Clear this field
This means if you already have the CD's copied on the the harddrive you don't need to copy them again..
CD Title------CD Location-----------CD copy to this location
kernel--------Dump location1-------clear , don't re copy
cd1-----------Dump2--------- -------clear, this field
cd2-----------........3-----------------clear
cd3-----------.........4----------------clear

Do you have a SAP Basis Question?

Best regards,
SAP Basis, ABAP Programming and Other IMG Stuff

http://www.sap-img.com

All the site contents are Copyright ©

http://www.sap-img.com

and the content authors. All rights reserved.
All product names are trademarks of their respective companies. The site

http://www.sap-img.com

is in no way affiliated with SAP AG.
Every effort is made to ensure the content integrity. Information used on this site is at your own risk.
The content on this site may not be reproduced or redistributed without the express written permission of

http://www.sap-img.com

or the content authors.

 

[spauser]

Hi

I have the similar issue .I also don't have the file db_ides.rs3..I believe you can use central.r3s from central instance and database.r3s for database instance ..I have read this on the net..

I'm installing 4.6C ..if have the steps for this then please send at sapcds@sbcglobal.net

thanks

sapuser

 

[germanguys]

hi spauser,
you can find the db_ides.rs3 file in first(db1) installtion cd disk.explore cd db1 and search for db_ides.rs3(18kb file).copy to C:\users\tekadm\install
bye