Stearing codes 1

[ckleinpe]

OPT 61c/rel 23.55

Which LD to I print my steering codes from? Also, do steering codes use BARS type routing tables... i.e. If I dial 4 digits to my remote office via my T-1 TIE circuit and that circuit goes down, can I route the call across my LD carrier by inserting NPA and NXX?

thanks

 

[MarieCurie]

Print steering codes in LD 87...

REQ PRT
CUST XX
FEAT CDP
TYPE DSC
DSC <cr>

This prints all your steering codes. If you want to see the RLI for just one, then at the DSC prompt, enter that particular code. You can direct the calls to your LD carrier, just by having a second entry in your RLB (LD 86) that points the calls to another route. You can use digit manipulation on this second entry to accomplish what you need. Digit manip tables are also administered in LD 86...

M.Curie

 

[ckleinpe]

Thanks a bunch m.curie... That's just what I wanted to know and it is set up like I thought!
have a great weekend...