Status cabinets

[no-sme-here]

Good morning. I searched with no luck and have been googling various forms of my question but no luck either. Is there a command to status the cabinets please?
Thanks in advance.

 

[bhassell2000]

what kind of system? You should be able to stat the loops that are in the cabinets

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[no-sme-here]

Thank you Buddy. It is a CS1000-S
Yes, I can stat loops and things. Looking for a command (if it exists) to stat the cabinets.

 

[Firebird Scrambler]

There are a couple of commands that I use

As it's a 1000s, then in LD 32, stat each card slot for details.
To stat the Cabinets are up, use

TTY #00 LOGGED IN ADMIN2 16:51 23/12/2016

>LD 135
CCED000
.STAT IPL
Media Gateway/Expansion Cabinet 1 : LINK UP

Media Gateway/Expansion Cabinet 2 : UNEQ

Media Gateway/Expansion Cabinet 3 : LINK UP

Media Gateway/Expansion Cabinet 4 : UNEQ

.

LINK UP = Cabinet is on line.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

 

[no-sme-here]

Thank you!