Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

stations ring before AA picks up

Status
Not open for further replies.

jmics

Technical User
Feb 29, 2012
42
US
on a MICS 7.1 with a NAM II 4.1, an AA is set up with a CCR tree.

several (but not all) DNs are ringing immediately when a call comes in, and then the AA picks up and plays the comp greeting followed by the CCR menu.

what would cause this behavior ?
 
That's what AA is designed to do. If you don't want this change the amount of rings before it answers or turn it off.

Wayne T
 
I see that the members of hunt group 1 are ringing before aa picks up. the lines are assigned to hunt group 1. aa is set to pick up on zero rings. the members do not have lines directly assigned.

I don't see how to set a delay before the hunt group rings in order to give the aa time to pick up before the hg does.
 
Take the lines out of the hunt group. You can still keep the HG and direct callers to it through the CCR.

Wayne T
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top