Station Control Password is not working SCPW

[ironrlo]

Hello World... I'm working with a 3904 telephone, it has a TGAR = 1, NCOS = 6 with CLS UNR. I'm trying to use the feacture SCPW with the following configure:

TYPE FFC_DATA
CUST 00
CCRS TLD
SCPL 4
SBUP YES
FFCS NO
STRL 0
STRG
ADLD 0
DFLT_SCPW NO

The main Idea is that a user can lock a telephone when he leaves the office and no body can used it to make calls... but is not working... the telephone allow to make calls with the SCPW actived... Help...Please....

 

[bigindian65]

post the tnb of the set it is not working on

Mato' Was'aka

 

[ironrlo]

DES INT
TN 004 0 00 02
TYPE 3904
CDEN 8D
CUST 0
KBA 1
FDN 7000
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
SCPW 1212
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR MTD FNA HTD TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHA IRA NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSA-CSI-L SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROA
DRDD EXR0
USRD ULAD CCBD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD CDMR
CPND_LANG ENG
RCO 0
HUNT 7000
LHK 5
LPK 0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 MCR 5391 0 MARP

 

[GHTROUT]

Can we assume you have ELKA and ELKD FFCs created, and that the CCS_DATA is built?

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[ironrlo]

Yes... elka is *5 and elkd is *6 and
REQ: prt
TYPE: ccs
TYPE CCS_DATA
CUST 0

TYPE CCS_DATA
CUST 00
CCRS TLD
ECC1 UNR
ECC2 UNR
CNCS
PELK YES

 

[GHTROUT]

Why not make CCRS = SRE or FRE. TLD does not stop people from making outgoing calls.

Make sure you have ESA set up so you do not block emergency calls.

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[ironrlo]

All right...thanks... I make the chage for CCRS=SRE.

In this moment is working fine now...

 

[siki85]

You should be carefull with this
IDC
DCNO
xxxxxx 5391

using CCRS = SRE, your going to block the DID for incoming calls....

check the CNCS too...

 

[GHTROUT]

Check your sources. SRE allows all incoming.

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[siki85]

SRE - Semi-restricted Allowed outgoing external calls via the attendant console only. Can receive external incoming calls

you´re right GHTROUT...

 

[GHTROUT]

Also, I have a handy CLS matrix here:

http://www.ghtrout.com/ghtrout/files/CLS_Restrictions_Matrix.html

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators