Static Routes - 2 providers - no balancing

[alavan]

Hi,

I have what I'm sure is a basic question. We are changing ISP's. We've got a T-1 to each on a 1720 with (2) internal WIC's and (1) 10/100 Eth port. We also have a Class C to each. So, there are (2) Class C's on the Eth port like this (for example):

192.168.50.0/24 - current ISP
192.168.100.0/24 secondary - new ISP

We've also got

Serial0
ip address xxx.xxx.xxx.xxx

Serial1
ip address xxx.xxx.xxx.xxx

What I want the router to do is to route:

all traffic from/to 198.162.50.0/24 through Serial0, and;
all traffic from/to 198.162.100.0/24 through Serial1

That's it. Nothing fancy. I'm thinking that I should have 2 routing statements, but I don't know how to achieve it. Can you help?

Thanks!

 

[Guest_imported]

You can do this by using policy routing, its not to hard to set up. I can help you but you need provide the next hop IP address for both of your serial interfaces.

 

[rmarshall]

Here's what you need...

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_c/qcprt1/qcdpbr.htm

 

[alavan]

Thanks guys! I've actually got it up and running.