Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

static on phones

Status
Not open for further replies.

gbriggs

MIS
Mar 3, 2003
147
US
I have an opt 11 rel 24. I am geting static on internal side of conversation. Various phones/cards. I have replaced DTI/PRI card, SSC and SCC. I have replaced CSU/DSU on both ends and I have switched the T1 to a different one. Still no change. Any suggestions?
 
The static is on the Opt 11 side not on the far end.
 
I have verified ground and it is tight. Would this affect T1 PRI?
 
Have you checked your structured cabling. It's the only thing I could think of. Because I've never seen a digital T1 line with noise.
 
could be the carrier's equipment.

I've had it in a E1 enviroment.

"Empowered, embattled, embittered - what am I?"
 
Check the ground it means not that you are connected to groung which I'm shure you are, check if the ground is a real effective ground. An elctrician with the proper gear may help you.

David from Israel
 
Well after verifying the ground with the sparkies it was better than good. I have finaly replaced the backplane and the trouble has stopped. Seems like I always trouble shoot in the wrong direction.... Thanks to all of you for your input.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top