Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
startup scripts prob
- Thread starter bcme10
- Start date
When in doubt, disconnect both the monitor and keyboard.
The Server (Ultra 5/10/netra/vxx/e450) will default to
move the console to the serial port. I then connect
via hyperterm to the port (9600,8,n,1). I suspect you
will see the OK prompt. Try to fix it from there.
The Server (Ultra 5/10/netra/vxx/e450) will default to
move the console to the serial port. I then connect
via hyperterm to the port (9600,8,n,1). I suspect you
will see the OK prompt. Try to fix it from there.
- Status
Similar threads
- Locked
- Question