Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Startalk VM on MICS 1

Status
Not open for further replies.
VT33

VT33

Programmer
May 8, 2006
46
US
Just upgraded 4.1 MICS with a working 4-port Startalk Flash VM...upgraded to 7.1 and VM will not come up...feature 983 requires 266344 password and asks for a "Key". Startalks have never needed keycodes...what's up????
 
Sort by date Sort by votes
Thanks for the reply...I did the F903 and ok'd the features, but F985 still said inactive and F983 was still asking for "key"...how do you get past "key"...do you hit #?
 
Upvote 0 Downvote
Not sure, can't get back in until Monday...what caused VM to reinstall? Is it 7.1 software...never had one do this before...it was fully programmed and working.
 
Upvote 0 Downvote
I've found nowhere that says Flash won't work with 7.1...user is not going to go for this. What is the latest release that will work with Flash VM, do you know?
 
Upvote 0 Downvote
VT33, sounds like you had a Flash 1.9 which I believe isn't supported on anything after 6.1.
 
Upvote 0 Downvote
Right. It does sound like you'll have to upgrade your vm sw.

Once you initialize the vm with f983 and 266344, next and yes through until you see "system ready". Then get back into f983, and press 9. That will display your sw level. If it's under 2.0, you'll have to upgrade it.

Sometimes an incompatible sw voice mail will initially come up on a system, but if it is not compatible on Nortel's Compatibility Matrix, you'll have nothing but trouble down the line.
 
Upvote 0 Downvote
Thanks Rik...did come up with 1.9 sw, but not functioning properly.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
807
curlycord
curlycord
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
468
curlycord
curlycord
telllman
  • Locked
  • Question
External Paging on Norstar MICS 12 32
Replies
5
Views
376
telllman
telllman
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
776
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top