Hi there..
Installed a Startalk flash with 1.9 version software with an existing MICS system, (which has a NAM before but that is now gone) The problem I am getting is that the flash seems to boot up fine but there is no connection between the two systems, none of the FEATURE 9### codes work, I cannot find the flash at all.
What could be the possible problems and ways to correct them? Also I've never connected a PC to a flash before, can someone let me know what would be required for such a setup, software/hardware wiring? Would that be a good way to find out if the flash works etc.?
Thanks!
Dc.
Installed a Startalk flash with 1.9 version software with an existing MICS system, (which has a NAM before but that is now gone) The problem I am getting is that the flash seems to boot up fine but there is no connection between the two systems, none of the FEATURE 9### codes work, I cannot find the flash at all.
What could be the possible problems and ways to correct them? Also I've never connected a PC to a flash before, can someone let me know what would be required for such a setup, software/hardware wiring? Would that be a good way to find out if the flash works etc.?
Thanks!
Dc.