Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Startalk flash 2.0 defaults to factory status 1

Status
Not open for further replies.

Alex51650

Technical User
Jan 21, 2008
43
US
I have recently had to reprogram startalk flash 2.0 is there any way to stop the from flash from defaulting back to factory settings is it a battery issue if so can it be replaced. It seems to happen on a few of my startalk flashes 2.0. Thanks for the input.
 
I've had this happen to several Flashes, generally if it happens once it will happen again soon. The only fix that I've found is to install a call pilot & call the Flash a goner.
 
Tell you customer to dole out for a Callpilot and KSU sfw update, bcm or to live with the risks; in this case like suggested a UPS, and make your customer aware of his choices and risks associated.

The Flash has long outlasted its usefulness.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top