Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Standard UK ARS Analysis Table

Status
Not open for further replies.

yettanother

Technical User
Nov 28, 2001
10
AP
Hey There,

Just wondering if anyone out there has a basic/standard ARS analysis table for the UK (London area, if they're regionalised). One of our PABX's has one that has huge amounts of useless entries (mostly for no longer used foreign offices), which I was hoping to clear out.

I used to have a whole bunch (1 for each city), back in Oz, but none for here.

Thanks in advance...

 
Hello this is what I use we are in the London area the 132 is for another carrier rather than BT. Its pretty basic but it does the trick. Hope this helps.






display ars analysis 0 Page 1 of 2
ARS DIGIT ANALYSIS TABLE
Location: all Percent Full: 1

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
0 9 11 1 pubu n
00 12 16 1 pubu n
01 9 11 1 pubu n
02 11 11 1 pubu n
07 11 11 1 pubu n
08 9 14 3 pubu n
09 8 11 1 pubu n
1 1 3 4 pubu n
112 3 3 4 pubu n
121 3 19 3 pubu n
123 3 3 7 pubu n
132 3 19 4 pubu n
141 3 19 4 pubu n
155 3 3 1 pubu n
192 3 3 3 pubu n
 
colby007,

Thanks heaps for responding. I'll have a squizz at ours and compare.

Cheers
Shane
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top