Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Standard ACD Agent presence??

Status
Not open for further replies.
Presence is not specific to any particular type of ACD

Presence is enabled or disabled via COS

If the agent has the options enabled in their COS then yes, the function is available via presence keys or speedcalls

**********************************************
What's most important is that you realise ... There is no spoon.
 
Group Presence key is not supported on Standard ACD set. You should use FAC instead.


Kelvin
 
what I'm after is to program a key on multiline sets so Agents can visually see if they are logged in or not, present or not present. Like a DND or Call FWD key that light up when user is in DND state or set is Forwarded somewhere else.

Cheers,

Daniel


 
Directly from the help files

Help said:
ACD and Hot Desking

Group Presence for Hot Desk users and ACD agents (Standard ACD Agent, Hot Desking and ACD Express) can be changed whether or not the user or agent is logged in. (Note: Standard ACD Agents are limited to using feature access codes to operate Group Presence; other agent types can use either FACs or feature keys.)

Group Presence for ACD applies to Agent ID members only. Subgroup ID members must be assigned the default value, 'Present'.

[highlight #FCE94F] Group Presence keys are not supported on ACD-enabled (Standard ACD Agent) sets.[/highlight]

Personal Ring Group Presence keys are not supported on ACD-enabled (Standard ACD Agent) sets nor in Hot Desk ACD Agent profiles.

The 'Group Presence 3rd Party Control' Class of Service option of the invoking party takes precedence over the 'Group Presence Control' option of the party whose Group Presence is being changed.

For ACD agents, the Leave Group, Leave Group 3rd Party and Leave All ACD Groups FACs will disallow leaving (or not completely leave in the case of All ACD Groups) if the agent is the last logged in and 'Present' agent in an agent group that has calls queued.

Attempts to change the Group Present status of a Hot Desk ACD agent in a particular ACD group to 'Absent' is disallowed if the agent is the last logged in and 'Present' ACD agent in that group.

Line appearances of a Hot Desk DN continue to receive group calls when the Hot Desk user is 'Present' in the group but logged out.

The "ACD Agent Behavior on No Answer" Class of Service option, when set to "Absent", automatically makes agents absent from all their groups on no answer.
 
Thats why we have moved to only using hot desk acd

then they can have the presence keys that light up

If I never did anything I'd never done before , I'd never do anything.....

and due to an endless stream of MiCollab , MiCC issues
Life would be simpler If only they tested products properly before releasing them .....
 
Thats why we have moved to only using hot desk acd

If memory serves, Hotdesk ACD will be the only way in the near future

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top