Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SSH on IPO Application Server 11.1.2.4.0 build 18 1
- Thread starter JoeNewton
- Start date
-
1
- #2
SSH is disabled by default. This is to prevent hackers from getting into it.
To enable SSH.
At the linux prompt login as root.
Enter: sudo vi /etc/ssh/sshd_config
Press ‘I’ to enter into insert mode and modify the entry.
Change PermitRootLogin no to PermitRootLogin yes
Press esc key to exit insert.
Type :wq to write and exit the editor.
At the command line type ‘service sshd restart’ to restart the service.
This will allow full access to the server file structure through WinSCP.
It is best practice to change this back to ‘no’ when the process is complete.
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
To enable SSH.
At the linux prompt login as root.
Enter: sudo vi /etc/ssh/sshd_config
Press ‘I’ to enter into insert mode and modify the entry.
Change PermitRootLogin no to PermitRootLogin yes
Press esc key to exit insert.
Type :wq to write and exit the editor.
At the command line type ‘service sshd restart’ to restart the service.
This will allow full access to the server file structure through WinSCP.
It is best practice to change this back to ‘no’ when the process is complete.
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
The above is for allowing SSH as root user, nothing to do with enabling SSH access overall. Not sure what's going on with yours, I have an upgraded 11.1.2.4 (from 11.1.2.3) that I can SSH to no problem though.
New England Communications
New England Communications
It was off by default from 10.1 through early versions of 11.1. If nothing else I would check that file and make sure it is enabled. It is like a five minute thing and you will know for sure that your
problem is else where.
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
problem is else where.
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
- Status