SSH and Microsoft's IAS (RADIUS) 2

[malshade]

Enabling SSH on Cisco gear seems easy enough. However, I can't find any good information on integrating MS' IAS. Have any of you done this before or know a good source of information on this subject?

Thanks

 

[malshade]

Event ID 2

User user was denied access.
Fully-Qualified-User-Name = domain\user
NAS-IP-Address = *.*.*.*
NAS-Identifier = <not present>
Called-Station-Identifier = <not present>
Calling-Station-Identifier = *.*.*.*
Client-Friendly-Name = WTP Router (Serial Int)
Client-IP-Address = *.*.*.*
NAS-Port-Type = Virtual
NAS-Port = 66
Policy-Name = <undetermined>
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 16
Reason = There was an authentication failure because of an unknown user name or a bad password.

 

[ADB100]

What is the Windows environment? is it Active Directory or just a standalone server? Is the IAS server registered in AD?

I am struggling a bit now as this worked pretty much straight away for me. If I attempt to log on with the wrong user name or password I get the same error as you.

Andy

 

[malshade]

Yes, AD and IAS is integrated. I came across the integration issue earlier and it wasn't turned on, so I was like YES! Then, unfortunately, I kept getting the same message. I'm sure it's something simple, I just have next to no experience working w/ this IAS....