SS PBX LINK FAILED

[VRRyan]

Went into LD 117 and ran stat serv and this was me result below. Along with some other things acting weird, you can see my SS which is 10.10.75.15 (ELAN IP) shows up as failed and unknown. Any Ideas? This is a Single Core CS by the way. I'm also getting this error in my call servers tty
[pre]ELAN028 The following server failed to register it's pbxLink.
IP <10.10.75.15>, host name <ucm>, server type <UNKN>.[/pre]

[pre]=> stat serv

NODE ELANIP LDR SRV PBXLINK HOSTNAME
ID STATE
10.10.75.43 NO DSPLD LINK UP MGC
APPS: VGW
PBXLINK DATE: 04/08/2023
PBXLINK TIME: 22:06:15
CONNECTID: 67f1138
VGWs: [reg - 00032] [busy - 00000]

1 10.10.75.15 YES UNKN FAILED ucm
APPS: LTPS
PBXLINK DATE: 04/08/2023
PBXLINK TIME: 22:05:17
CONNECTID: 0


=>[/pre]

STAT CPU in LD 135 Responds with:
[pre]CCED000
.stat cpu

cp 0 10 PASS -- ENBL

SYSTEM STATE = NOT REDUNDANT (SINGLE)
DISK STATE = NOT REDUNDANT
HEALTH = 14
VERSION = Dec 5 2012, 12:30:52
Side = 0, DRAM SIZE = 1006 MBytes

CP[0] located at IPMG [0 0 10]


cp 1 UNKNOWN PASS -- STDBY

SYSTEM STATE = NOT AVAILABLE
DISK STATE = UNKNOWN
HEALTH = 0
VERSION =
Side = 1, DRAM SIZE NOT AVAILABLE

CP[1] located at IPMG [UNKNOWN]

=========================================
Summary of Local System Resource (side 0)
=========================================
File Descriptors
-----------------
alloc 78
free 1970
total 2048

Unprotected Heap (bytes)
------------------------
alloc 79561944
free 439827448
total 519389392

Protected Heap (bytes)
----------------------
alloc 2631908
free 1562396
total 4194304
.[/pre]

CS1000 Enthusiast
Fire Safety and Security Enthusiast

https://vrryan6.com

 

[VRRyan]

I'm still able to access ucm and make changes and whatnot but for whatever reason that displays as failed.

CS1000 Enthusiast
Fire Safety and Security Enthusiast

https://vrryan6.com

 

[Firebird Scrambler]

I think you will need to remove any references to CPU 1. I wouldn't worry about it.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.net

linkedin

 

[VRRyan]

Alright, I’ll do that and report back. Any ideas on that “ucm link failed” thing though?

CS1000 Enthusiast
Fire Safety and Security Enthusiast

https://vrryan6.com

 

[bignose21]

so in the command line of the UCM (which by you status in LD 117 looks like its also running LTPS for IP Sets) if you do a pbxLinkShow I would imagine that you see it down which is what it is complaining about, also try servicesStatusShow do they all look to be running. I would guess the UCM is also running sig server so you should have an element manager for it? If so take a look at the node config in there.