Not sure if this is possible, but I have an office move which has a fax line working off my CS1000. They are moving to a location running only VoIP Phones off of an SRG. Is it possible to route their fax line through NRS and make it work off one of the SRG analog ports? I'm trying to avoid buying a B-1 line.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SRG - Analog/VoIP Question
- Thread starter Cyanyde
- Start date
JustAGlitch
Programmer
Shold be possible just send a distant end stering code to the BCM from CS1K across VOIP and make that the private rec number on the BCM target line to that analog DN. You will probably have to enable T.38 for fax to transmit.
- Thread starter
- #3
I do have T.38 enabled, made my target line my 4-digit extension and added that line to ring on my Analog Set. I have also configured NRS for that extension to route to my SRG. I have not modified the TN in any way within the CS1K from when it was working locally. Would I need to convert it to a VoIP TN to make this work?
I do apologize if these are dumb questions, I'm coming from a military background working on DMS-100s, the CS1K is a new animal to me, although I have worked alot with BCMs and feel comfortable in the SRG.
I do appreciate the assistance!!
I do apologize if these are dumb questions, I'm coming from a military background working on DMS-100s, the CS1K is a new animal to me, although I have worked alot with BCMs and feel comfortable in the SRG.
I do appreciate the assistance!!
JustAGlitch
Programmer
What version is the SRG and what version is the CS1K? SIP or H323?
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question