Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SRG 50 cannt call local mode to normal mode

Status
Not open for further replies.

hemsanda22

Technical User
Apr 20, 2009
46
LK
HI Guys,

I have SRG 50 Rls 3.0 connected to CS1K via NRS.
I cannt make a call from local mode phone to Normal mode IP phone.
But Normal mode IP phone to local mode phone is possible.
Also any other phones in CS1K and branch offices also possible.
Can someone help me in the parameters that we need configure?

Thanks.
 
Do you have destination codes in the SRG pointing the normal mode DNs to the IP trunk route?
 
How are you placing calls between local mode and Normal mode phones since when you bring it into local mode it is no longer seen at the main site? Do you have DID service going into the SRG?
 
Im using 58 as detination code,When I press 58 I can see the last IP trunk is selected.
We have DID pointing from CS1K. I can receive calls as a full DID no on local mode phone.

 
If anyone did this configuration, Please explain me.
I'll be very much appreciate to you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top