SPN LD 90

[altolabado]

SPN
___________________________________________

How would I find where these RLI go to? (what Route)?

SPN 0
RLI 7
SDRR NONE
ITEI NONE

SPN 0110
RLI 11
SDRR NONE
ITEI NONE

SPN 0111
RLI 11
SDRR NONE
ITEI NONE

SPN 0112
RLI 11
SDRR NONE
ITEI NONE

SPN 0113
RLI 11
SDRR NONE
ITEI NONE

SPN 0114
RLI 11
SDRR NONE
ITEI NONE

SPN 01150
RLI 11
SDRR NONE
ITEI NONE

SPN 01151
RLI 11
SDRR NONE
ITEI NONE

SPN 01152
RLI 11
SDRR NONE
ITEI NONE

SPN 01153
RLI 11
SDRR NONE
ITEI NONE

SPN 01154
RLI 11
SDRR NONE
ITEI NONE

SPN 01155
RLI 11
SDRR NONE
ITEI NONE

SPN 01156
RLI 11
SDRR NONE
ITEI NONE

SPN 01157
RLI 11
SDRR NONE
ITEI NONE

SPN 01158
RLI 11
SDRR NONE
ITEI NONE

SPN 01159
RLI 11
SDRR NONE
ITEI NONE

SPN 0116
RLI 11
SDRR NONE
ITEI NONE

SPN 0117
RLI 11
SDRR NONE
ITEI NONE

SPN 0118
RLI 11
SDRR NONE
ITEI NONE

SPN 0119
RLI 11
SDRR NONE
ITEI NONE

SPN 10110
RLI 10
SDRR NONE
ITEI NONE

SPN 10111
RLI 10
SDRR NONE
ITEI NONE

SPN 10112
RLI 10
SDRR NONE
ITEI NONE

SPN 10113
RLI 10
SDRR NONE
ITEI NONE

SPN 10114
RLI 10
SDRR NONE
ITEI NONE

SPN 101150
RLI 10
SDRR NONE
ITEI NONE

SPN 101151
RLI 10
SDRR NONE
ITEI NONE

SPN 101152
RLI 10
SDRR NONE
ITEI NONE

SPN 101153
RLI 10
SDRR NONE
ITEI NONE

SPN 101154
RLI 10
SDRR NONE
ITEI NONE

SPN 101155
RLI 10
SDRR NONE
ITEI NONE

SPN 101156
RLI 10
SDRR NONE
ITEI NONE

SPN 101157
RLI 10
SDRR NONE
ITEI NONE

SPN 101158
RLI 10
SDRR NONE
ITEI NONE

SPN 101159
RLI 10
SDRR NONE
ITEI NONE

SPN 10116
RLI 10
SDRR NONE
ITEI NONE

SPN 10117
RLI 10
SDRR NONE
ITEI NONE

SPN 10118
RLI 10
SDRR NONE
ITEI NONE

SPN 10119
RLI 10
SDRR NONE
ITEI NONE

SPN 411
RLI 7
SDRR NONE
ITEI NONE

SPN 611
RLI 7
SDRR NONE
ITEI NONE

SPN 911
RLI 8
SDRR NONE
ITEI NONE

 

[ArchibaldJCox]

in LD 86 you can print the information

...
>LD 86
REQ: PRT
CUST 0
FEAT RLB
[COLOR=red][b]RLI x <-- your RLI number[/b][/color]
<carraige return through>
...

In each entry (ENTR) there will be a route specified (the prompt is ROUT) It will first attempt to use the route specified in entr 0, if the call can't get out that way for whatever reason, then it will try the next entry in line, etc. etc.

Arch

 

[johnpoole]

also in that entry you will see frl which is the cost of a path.. your ncos must = or excede that to use that route. and you may see dmi= x (x is any number except 0).. if you do see a number larger then 0.. in the same load prt dgt
at the dmi prompt enter your dgt and you will see a delete and insert prompt... the delete is = to the number of LEADING digits to drop.. the insert is the exact trailing digit to add, if i dial 9+911 bars sucks up the 9 my spn sends 911 to rlb 3.. flb chooses route 1, my frl= 1 if my ncos is 1 or above i send 911 to the carrier.. if i put a dmi in i can delete (3) and insert 411... then if you dial 911 i get the information operator... then the owner of the bussiness decides i REALLY did need for him to pay that invoice... this is used where the digits dialed and the digits sent need to change...i have been asked to del 911 and send a sccurity service number instead...ie 434 1234...

john poole
bellsouth business
columbia,sc