Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Split tunnel ???
- Thread starter Spawnadv
- Start date
TechyMcSe2k
Technical User
Open Pix Web based Manager, click on the VPN tab, under Remote Access
click on Cisco VPN Client. On the right highlight your Group Name and choose edit.
At the bottom right is Manage Split Tunneling. Click on it, then choose specify
network manually. Put your Network in the boxes and choose add. Save your changes.
Hope this helps.
Cliff, CCNA/MCSE/MCSA 2000
Network Systems Engineer
click on Cisco VPN Client. On the right highlight your Group Name and choose edit.
At the bottom right is Manage Split Tunneling. Click on it, then choose specify
network manually. Put your Network in the boxes and choose add. Save your changes.
Hope this helps.
Cliff, CCNA/MCSE/MCSA 2000
Network Systems Engineer
TechyMcSe2k
Technical User
Or see this post for the command line version.
thread35-708270
Cliff, CCNA/MCSE/MCSA 2000
Network Administrator
The link below is an excellent guideline:
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question