Speed Call on a cs1000 phontom phone?

[kennyjp123]

Hello I'm trying to put a speed call on a 500 phantom phone can I do it? I've put them on regular phones before but not a phantom can it be done?
This is on a Nortel cs1000 I've created a ssc in ld 18 but when I try and put it on the phantom I get reorder??

 

[yyrkroon]

NO you can't

 

[Firebird Scrambler]

For a phantom set, you can only add in the number to be dialled against the FTR DCFW area. You will also need to have CLS = CFXA and possibly CLS = FNA if you also have the SCPW set as you can use the remote call forward (FFC = RCFA) to change the dialled number at a later date.

When adding in the FTR DCFW number, you need to enter in the max number of digits allowed before the number dialled. i.e. FTR DCFW 12 918003334444.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[kennyjp123]

OK so this is what I've programmed

AST NO
IAPG 0
HUNT
TGAR 0
LDN NO
NCOS 6
SGRP 0
RNPG 0
XLST 0
SCI 0
SCPW 1234
CLS UNR DTN FBD XFD WTA THFD FNA HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD LPD XHD SLKD CCSD LND TVD
CFTA SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTU
CDMR PRED MCDD T87D SBMD PKCH MPTD ELCD
RCO 0
PLEV 02
PUID
UPWD
AACS NO
MLWU_LANG 0
FTR SCC 0022
FTR DCFW 8 33711
DATE 20 JUL 2016

 

[Firebird Scrambler]

You need to have CLS = CFHA and perhaps FNA.The DCFW will need to have the full speed dial entry added in.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[kennyjp123]

ok thanks