Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

specs for distance for digital and analogue phones 1

Status
Not open for further replies.

smokinjoe2938

Programmer
Apr 10, 2013
2,608
US
On an IP Office 500v2 version 9, what is the maximum distance that I can install an analogue or digital phone from the base IP Office? Thanks so much for any responses.

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Telephone Extension Cable Lengths

The following table details the maximum cable lengths supported for the telephone ranges. These figures assume that standard twisted-pair telephone cable or CAT5 network cable is used.

Unshielded Twisted-Pair (UTP) - 50nf/Km

AWG22 1200m/3937'
AWG24 1000m/3280'
AWG26 670m/2200'

 
amriddle01, thank you sir for the quick response, a star you are!

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
I am looking into this for a customer of mine.

Why does the knowledgebase say only 1300ft/400m on a ds30b?

The old ds30 is 3280.

Confused.

How is this usable for any decent size manufacturing plant?
 
Did you check the type of cable that is mentioned at the 400 meters :)

BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top