specific analoque trunk line

[CHRIN1]

Dear,

I would thanks for all that could help me. my boss he want to call oversea but in my trunk lines there was only 1 line
that can oversea call (1-0-62-00) that is why i want to specific this line for my boss's extension when he want to call out. i use MD110 BC11 and phone set is erricson 3213
digital extension.

B/G

 

[MDadmin]

chrin1,

Unfortunately, I do not understand your question.
Do you want to initiate a private trunk with fully open category for your boss?

 

[singhbrindisi]

MDadmin :
he has only one trunk with ISD facility & wants to access only that trunk whenever needs to call International number.

CHRIN1:
Initiliaze only one TRU(1-0-62-00)in a new route with a dest code.
ROCAI/ RODAI/RODDI/ROEQI/RODNI etc.

Whenever he has to call International no. dial the Dest code before or assign a key on his phone with DEST.

Hope it will help.

BR
brindisi

 

[CHRIN1]

DEAR,
I DO AS YOU HAVE SET LIKE THIS:

ROCAI:ROU=2,SEL=712000000000001,TRM=4,SERV=2100000000,NODG=1,DIST=30,DISL=128,TRAF=03151501,SIG=211000000000,BCAP=001100;
RODAI:ROU=2,TYPE=TL11,VARI=00000108,VARO=00002816,VARC=00000012,FILTER=NO;@/EXECUTED/
RODDIEST=1,ROU=2,ADC=00050000000002500000000,TRC=0,SRT=2,NUMACK=0;@/EXECUTED/
ROEQI:ROU=2,TRU=1-1,EQU=1-0-62-00;@/EXECUTED/
WHEN I DIAL 1 THEN NOTHING HAPPEN IT MEANS I CALL TO ANOTHER EXTENSION. I HAVE 20 TRU LINE BUT ONLY 1 CAN CALL OVERSEA SO ANY ADVISES I STILL WAIT

 

[singhbrindisi]

You can't choose a dest code(1) which matches with Extension series(1***).
Then Enable new Dest code in NANSI:NUMTYP=ED, etc.
also NANSI:NUMTYP=CD, with CAT info .

Or post your NADAP & KSDDPIR=BOSS; here

BR