Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Spares Question

Status
Not open for further replies.

DKThomas

Technical User
Feb 14, 2014
114
US
Need a little clarification, please, folks. I currently have 4 IPO500 v2 units in operation, and would like to keep a spare v2 chassis. Am I correct that I can just transfer my modules and SD card to a new chassis and resume operation? The license keys are only tied to the SD card serial number, correct? The units I have in place now are 8.0, 8.1, and two 9.0's.
Thanks,
DT
 
As long as you have Essential edition licenses on the card (Not virtual), then yes.

Are all these system connected in SCN? If so, remember that the R8.0 might cause some disturbance.
SCN'd IPO's should not be more than 1 major release apart in total.

Kind regards

Gunnar
__________________________________________________________________
Hippos have bad eyesight, but considering their weight, it’s hardly their problem

2cnvimggcac8ua2fg.jpg
 
Thanks, Gunnaro. No, they are all independent systems, and are all licensed Essential.
 
Then you are good to go [smile]

Kind regards

Gunnar
__________________________________________________________________
Hippos have bad eyesight, but considering their weight, it’s hardly their problem

2cnvimggcac8ua2fg.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top