i have purchased a sun sparcstorage rsm 219 scsidisk array with 7 9.1 gb scsi disks. it has an 80 pin connecter on it. i havew from before a compaq smart2\p scsi raid controller. problem is is that i cant get windows to recognize the disk array. ive tried windows nt4,xp, 2000 and 2003 server. can ayone help me?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
sparcstorage rsm 219
- Thread starter djdark
- Start date
Don't forget the RSM tray is differential SCSI. not Single ended. So you need a differential SCSI controller in you PC, I think there is your problem.
Default SCSI adresses are 8 till 14, so you need a wide differential controller.
You can set dipswitches/jumper in the RSM tray to get the SCSI adresses to 0 till 6
Default SCSI adresses are 8 till 14, so you need a wide differential controller.
You can set dipswitches/jumper in the RSM tray to get the SCSI adresses to 0 till 6
- Status