SOS - Client PC's can't access the INTERNET!!!

[gomobile]

We just installed SBS 2000 (1 nic for internal and 1 nic for external = cable modem). This concept was the same for the previous NT 4.0 Server that just disconnected. So all was fine here (web, email, etc = OK)>

Now, here is my delima:

1) SBS ran wizard for internet acess and came back and everything was set (OK). I tested IE and was able to get to the net from the SERVER without any problems. We can also send emails in and out so all looks fine here (we also have exchange 2000).
Note: All pc's can get to email and such.


BUT here is the problem now.

The clients can NOT access the INTERNET (we are using DHCP). Any ideas as to where I can look as I am very new to this ISA stuff. Is the SVR blocking them if so where can I check?

thxs

 

[stonehouse]

Had this problem too after installation... Try this:

Make sure your Local Access Tables in ISA only have the address of your internal LAN.

ISA/Network Configuration/Local Address Table (LAT)

Right-click the Local Address Table folder and select Contruct LAT. Remove the checkboxes on the external range.

You'll have to reboot.