Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sopho iS4000

Status
Not open for further replies.

Asterixx

Technical User
Feb 19, 2018
21
RO
Hi,
On a Sopho PABX iS4000 cannot execute command chcalf; message "restriction on action"
Thanks !
 
<diovlm:chcalf;

UNIT OVERLAY-ID REFERENCE LOAD-STATUS CURR-AUTH

1 CHCALF - PER 1
EXECUTED
<chseau:1,?

ALLOWED: Allowed or not (0 = not allowed, 1 = allowed)
<chseau:1,1;
EXECUTED

 
Thanks a lot for your answer but didn't work; here is system answer:
+++ 0980-0001-0874-0001 2018-08-31 +5+ 11:29+ #0057 VDU010 >
<

EXECUTED
<chseau:1,1;
EXECUTED
<chcalf:?
Change call forwarding relation

CHCALF: <CF-TYPE>,[<ORIG-BSP-ID>sr][[,[<DEST-NUMBER>]]
[,[<UNIT>]][,[<CFDA-TIME>][,<CALL-ORIG-TYPE>]]];

If DEST-NUMBER is omitted, the call forwarding relation of the originator will
be erased.
Depending on the CF-TYPE, the originator should be a BSP-ID or a UNIT:

| CF-TYPE | ORIG-BSP-ID | UNIT |
|----------------+------------------------+-----------|
| 0, 1 and 8 | extension BSP-ID | - |
| 2 and 3 | group DNR (All groups) | - |
| 4 and 5 | ACD group DNR | - |
| 6, 7, 9 and 10 | - | UNIT |

For CF-TYPE 6, 7, 9 and 10 UNIT might only be omitted in a single unit system.

Layout for CF-TYPE = 0:
CHCALF: <CF-TYPE>,<ORIG-BSP-ID>sr[,<DEST-NUMBER>
[,,[<CFDA-TIME>][,[<CALL-ORIG-TYPE>]]];

Layout for CF-TYPE = 1..5 and 8:
CHCALF: <CF-TYPE>,<ORIG-BSP-ID>sr[,<DEST-NUMBER>][,,,[<CALL-ORIG-TYPE>]];

Layout for CF-TYPE = 6, 7, 9 and 10:
CHCALF: <CF-TYPE>,,[<DEST-NUMBER>],<UNIT>[,,[<CALL-ORIG-TYPE>]];
<chcalf:0,4005,16134597,,10;
Error 39: Invalid input data
REJECTED
<chcalf:0,4005,16134597,1,10,0;
Error 28: Illegal parameter combination
REJECTED
<^X
Message 211: Input line discarded
<^D
Message 235: END OF DIALOGUE # #0057 +++
 
hi
what is 16134597 ?
if Trunk access code verify with:
dinars:5;
if present


this command is correct
<chcalf:0,4005,16134597,,10;


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top