sopho engaged light 2

[ssuem118]

We would need to install a light/led over one of our communication posts, to see when one person is engaged at the telephone.
How it’s possible to make it?
On the behind of the phone is present a door, a model with 9 poles; it’s possible to have an electrical pattern, or use it to connect it to a led?
Thank you

COOLDUDE6 wrote:
An RJ11 socket on the base of the ErgoLine D340 can be used as an external control line for
items such as a second bell, a door opener or a door lamp. A single input channel for footswitch
operation is also available.

SIGNAL PIN DESCRIPTION
1 +5V supply voltage
2 Busy indication
3 Door opener
4 Foot switch
5 Earth
6 Second bell


I thank COOLDUDE6 for the answer.

On the base of the telephone I have three takings RJ11; the first one is the exit for the cornet and the bonnets, the second it brings the writing "audio", the third one the symbol of an switch, that I think both that to be used for connecting the leds.

I have tried the connections among the pin 1-2 and 2-5, but the led remains always turned on, both in attended that during a phone call.
Must the telephone be programmed perhaps?

Can someone tell me to which pin it is correct to connect the leds?

Thanks

 

[cooldude6]

according the manual there is an option in the toggle list.
its called 'light doorlamp when busy'.
I Guess this has to be set ( never used it ).

Also this option is only available in 'special mode'
The special mode password should be 2468

Entering special mode :
- features
- setphone
- setmode
- 2468
- OK

Return to user mode :
- features
- setphone
- setmode
- usermode
- exit key

Good Luck !