Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

sony dru500a wont burn cue files????

Status
Not open for further replies.
jimmy7386

jimmy7386

Technical User
Feb 17, 2006
15
0
0
GB
i have had this drive about 3 years now and i have burnt just about everything you can with it. But just recently i have been trying to burn a cue files to cdr with either alcohol 120 or nero and it keeps comin up with errors such as "power calibration error" Here is a copy of the log file after the last attempt with nero!!
Dad
Home

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1019), size=45056 bytes, created 10/05/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4

Recorder: <SONY DVD RW DRU-500A> Version: 2.1a - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DRU-500A >Version: 2.1a - HA 1 TA 0 - 7.0.5.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-500A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 175MB (179504kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.3.2006
CD Image
12:06:39 #1 Text 0 File Burncd.cpp, Line 3044
SONY DVD RW DRU-500A
Power-Burn activated

12:06:40 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

12:06:40 #3 Text 0 File Reader.cpp, Line 124
Reader running

12:06:40 #4 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-500A running

12:06:40 #5 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = '
TocType = 0x20
Finalized = 1
First/Last Track = 1 / 2
1: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_DATA_RAW_MODE2'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 352800, NextTrackFilePos = 1058400
2: ISRC = '
Blocksize = 2352
TrackMode = 'TRM_DATA_RAW_MODE2'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 1058400, Index1FilePos = 1411200, NextTrackFilePos = 816701424
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk= 2 (0x02) Index=00 Start=00:04.00 ( 300) RecDep=0x00
4: Ctrl=0x41 Trk= 2 (0x02) Index=01 Start=00:06.00 ( 450) RecDep=0x00
5: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=77:07.62 ( 347087) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\lava.nrg>

12:06:40 #6 Text 0 File Burncd.cpp, Line 3341
Turn on Disc-At-Once, using CD-R/RW media

12:06:40 #7 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 347086 ( 77:09.61)

12:06:40 #8 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)

12:06:40 #9 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: SONY DVD RW DRU-500A

12:06:40 #10 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:06:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (1 - CD-ROM Mode 2/XA, ISO 9660)
2 indices, index0 (150) provided
original disc pos #0 + 300 (300) = #300/0:4.0
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 300 blocks [D: SONY DVD RW DRU-500A]
1: TRM_DATA_RAW_MODE2 (2 - CD-ROM Mode 2/XA, CD-ROM Mode 1)
2 indices, index0 (150) provided
original disc pos #450 + 346637 (346637) = #347087/77:7.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 346637 blocks [D: SONY DVD RW DRU-500A]
--------------------------------------------------------------

12:06:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 1051200, ISRC ""
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 1051200 1401600 811145632, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
300 | 2 | 0 | 0x41 | 0x00
450 | 2 | 1 | 0x41 | 0x00
347087 | lead-out | 1 | 0x41 | 0x00

12:06:40 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:06:40 #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:06:40 #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

12:06:40 #16 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.

12:06:40 #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

12:06:40 #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (600 KB/s)

12:06:40 #19 SPTI -1189 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 30 02
Buffer x04e5f600: Len x4000

12:06:40 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:06:40 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #450): write at #450

12:06:40 #22 Text 0 File MMC.cpp, Line 17173
StartDAO : CD-Text - Off

12:06:40 #23 Text 0 File MMC.cpp, Line 21850
Set BUFE: Power-Burn -> ON

12:06:40 #24 Text 0 File MMC.cpp, Line 17404
CueData, Len=48
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 02 00 20 00 00 06 00
41 02 01 20 00 00 08 00
41 aa 01 24 00 4d 09 3e

12:06:44 #25 Text 0 File Cdrdrv.cpp, Line 1210
12:06:44.359 - D: SONY DVD RW DRU-500A : Queue again later

12:07:12 #26 SPTI -1106 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 0C EA 00 00 1C 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 73 03
Buffer x09800000: Len xff80
0x01 01 62 0F 01 01 62 0F 00 00 01 BA 21 03 25 B1
0x09 80 23 3F 00 00 01 E0 09 02 FF FF FF FF FF FF
0xFF FF FF 0F E9 62 AA 25 01 30 20 61 00 C4 9A 4C

12:07:12 #27 CDR -1106 File Writer.cpp, Line 302
Power calibration error
D: SONY DVD RW DRU-500A

12:07:12 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:07:12 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:07:12 #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (600 KB/s)


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 08:53:04
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 20/12/2005 16:23:02 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any ideas anyone?
 
Sort by date Sort by votes
Jimmy7386,
What did you Create the CUE file with? My understanding of a CUE file is that it is a small file that works with a BIN file and together create a Disk Image file. Have you tried burning it as an Image.
 
Upvote 0 Downvote
@Mainegeek - a CUE file is just a TEXT file telling the burn soft which BIN file to burn and what parameters to use, etc...

@Jimmy7386 - Calibration errors usually indicate a problem with the MEDIA in use, ie. the drive does not recognize the CD R that you are trying to use and thus can not calibrate the LASER correctly... this can usually be alliviated by, 1.) updating the Firmware on the drive, 2.) updating the burn software, and or 3.) use another CD-R make...

Ben

"If it works don't fix it! If it doesn't use a sledgehammer..."
 
Upvote 0 Downvote
sorted now cheers i had set the bloody drive to slave and it didnt like it!!!!! all sorted now
 
Upvote 0 Downvote
Glad you got it running... although that is a first to me, that a drives Master/Slave setting hampered the burning of a CD-R...


Ben

"If it works don't fix it! If it doesn't use a sledgehammer..."
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

tviman
  • Locked
  • Question
Copying different files to Flash Drives 2
Replies
8
Views
115
strongm
strongm
princesspink
  • Locked
  • Question
Dell screen goes black and wont come back on
Replies
8
Views
88
AdrianGates
AdrianGates
javierdlm001
  • Locked
  • Question
Where is my HD? It won't show in Files Explorer
Replies
1
Views
53
javierdlm001
javierdlm001
DrJorde
  • Locked
  • Question
Sony Laptop suddenly stops working 2
Replies
6
Views
59
MikeHalloran
MikeHalloran
SASeagull
  • Locked
  • Question
permanantly delete already deleted files 3
Replies
11
Views
96
goombawaho
goombawaho

Part and Inventory Search

Sponsor

Back
Top