Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sony AIT1 drives anyone?
- Thread starter mcurran1
- Start date
Palindrome
MIS
mcurran1,
Don't think your problem lies with Legato losing the inventory information from the ADIC Scalar 1000. Try running the "Inquire" command and checking the SCSI id order of the drives. Its possible that the physical order of the drives is different than what Microsoft Windows thinks is the order. You may have to change the physical cabling in the ADIC on the drives to get it correct. Legato and drive information from the Scalar may not be the same. I've got this info for 2 different sources. You may want to make a "Lemaytrix" and record which drive continues to give this error and troubleshoot it from their. Good Luck
Don't think your problem lies with Legato losing the inventory information from the ADIC Scalar 1000. Try running the "Inquire" command and checking the SCSI id order of the drives. Its possible that the physical order of the drives is different than what Microsoft Windows thinks is the order. You may have to change the physical cabling in the ADIC on the drives to get it correct. Legato and drive information from the Scalar may not be the same. I've got this info for 2 different sources. You may want to make a "Lemaytrix" and record which drive continues to give this error and troubleshoot it from their. Good Luck
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question